Tag Archives: paint compressor

China Custom Screw Air Compressor for Paint Booth Air Dryer, Air Tank and Filter Screw Air Compressor Painting Cabin Painting Booth Spray Booth air compressor price

Product Description

Product Description

WLD Screw Air Compressor,Air Dryer,Air Tank and Filter

Product Parameters

1. Screw Air Compressor

Screw Air Compressor A Series
Model WLD-10A WLD-15A WLD-20A WLD-30A WLD-40A WLD-50A
Air volume/Air pressure(m3/min/Mpa) 1.35/0.7 1.8/0.7 2.5/0.7 3.8/0.7 5.2/0.7 6.5/0.7
1.2/0.8 1.6/0.8 2.3/0.8 3.4/0.8 5.0/0.8 6.1/0.8
1/1.0 1.3/1.0 2/1.0 3.1/1.0 4.3/1.0 5.5/1.0
0.8/1.2 1/1.2 1.7/1.2 2.7/1.2 3.8/1.2 4.9/1.2
Ambient temperature(ºC) -5~+45ºC
Cooling way air cooling
Discharge temperature(ºC) ambient temperature <15ºC
Lubrication oil(L) 6 12 18 20 20 29
Noise(dBA) 66±2 68±2
Driving way  belt drive belt drive  belt drive direct drive
Electricity(V/ph/Hz) 380/3/50
Power(KW) 7.5 11 15 22 30 37
Starting method Y-△Starter
Dimension(mm) L 960 1100 1100 1380 1500 1500
W 580 710 710 850 1000 1000
H 770 1100 1100 1250 1350 1350
Net Weight(kg) 178 327 337 500 683 683
Outlet pipe dia(inch) 1/2″ 1″ 1″ 5/4″ 3/2″ 3/2″

Direct drive screw air compressor
Connected with rotor, motor and it’s outer case form a unit which can achieve zero maintenance. Besides, due to less spare parts, direct drive has less transmission loss to make it more stable and get longer life.

2.Air dryer

Refrigerated air dryer
Advantage

  1. Low dew point-pressure dew point as low as 5ºC, outlet dew point can reach 15ºC or lower on standard condition.
  2. High-efficiency pre cooling regenerator-reduce the load of evaporator by increasing outlet temp by 10-15ºC and decreasing inlet temp by 8-12ºC
  3. Colliding whirlwind air-water separator-air and water can be completely separated at dew point.
  4. Heat bypass valve-balance pressure, reduce load of compressor, decrease power loss, ensure performance of dryer even at low temperature environment.
  5. Pressure protection switch-avoid damage to dryer compressor if any fault
  6. Protective welding way-ensure cleanness in cooling system and avoid to block system
  7. Good quality cooling spare parts-Panasonic, Cope-land, Tecumseh, CZPT compressor, CZPT expansion valve, Saginomiya solenoid valve.
  8. Increased condenser-15-20% bigger than normal condenser make sure refrigerant liquefy completely at serious environment.
  9. Compact outline-small size, less weight, easy to install and disassemble
  10. Strict QC-test completely before leaving factory to ensure 100% good products.

Refrigerated air dryer
Advantage

  1. Low dew point-pressure dew point as low as 5ºC, outlet dew point can reach 15ºC or lower on standard condition.
  2. High-efficiency pre cooling regenerator-reduce the load of evaporator by increasing outlet temp by 10-15ºC and decreasing inlet temp by 8-12ºC
  3. Colliding whirlwind air-water separator-air and water can be completely separated at dew point.
  4. Heat bypass valve-balance pressure, reduce load of compressor, decrease power loss, ensure performance of dryer even at low temperature environment.
  5. Pressure protection switch-avoid damage to dryer compressor if any fault
  6. Protective welding way-ensure cleanness in cooling system and avoid to block system
  7. Good quality cooling spare parts-Panasonic, Cope-land, Tecumseh, CZPT compressor, CZPT expansion valve, Saginomiya solenoid valve.
  8. Increased condenser-15-20% bigger than normal condenser make sure refrigerant liquefy completely at serious environment.
  9. Compact outline-small size, less weight, easy to install and disassemble
  10. Strict QC-test completely before leaving factory to ensure 100% good products.

Air Dryer Technical Specification
 

Model WLD-10 WLD-20 WLD-30 WLD-50
Air volume(m3/min) 1.5 2.5 3.8 6.7
Working condition A. entrance temp 80ºC  B. environment temp 45ºC  C. air pressure 10 kg/cm2
Pressure dewpoint 2~10ºC
Refrigerant R22
Refrigerant Motor(HP) 0.35 0.5 0.75 0.8
Electricity AC 220V 50
Dimension(mm)L 620 750 800 930
W 410 420 425 485
H 650 730 810 900
Weight(kg) 38 60 73 92

3.Air tank

 

AIR TANK DATA  
 
NO. Specifications Temp(ºC) Total height(mm) Inside size  (mm) Air inlet port Air outlet port Support pillar Blowdown valve connector(inch) Compressor capacity parameters(m3/min)  
Volume(m3) Pressure(MPa) Height(mm) Port Size(mm) Connector(inch) Height(mm) Port size(mm) Connector(inch) Separation distance (mm) Size   (mm)  
1 0.3 0.8 150 1592 550 642 25 1 1242 25 1 400 20 0.5 2.6-3  
1 1592  
1.3 1598  
3 0.6 0.8 150 1905 700 680 40 1.5 1550 40 1.5 490 24 0.5 4.8-6  
1  
1.3  
4 1 0.8 150 2240 800 760 40 1.5 1760 40 1.5 560 24 0.5 8-10  
1 2243  
1.3 2291  

4.Filter 
Precision filter
Function
Filter out ozone, gas and particulates in compressed air.
Multi filter material include borosilicate fiber, glass fiber, acticarbon fiber, unwoven fabric and stainless steel mesh.
C filter, remove most liquid and 3 μm above particulates, oil content as low as 5ppm and little water, dust and oil mist.
T filter, remove 1μm above liquid and particulates, oil content reach 0.5ppm.
A filter, remove 0.01μm above liquid and particulates, oil content reach 0.001ppm
 

 

Associated Products

WLD Air compressor

Company Profile

Product Showroom
Meeting Room
Exhibition

FAQ

FAQ

Q1:Are you Manufacturer or Trading Company?
A:We are a professional manufacturer with our own export department.
Our factory was established in 2000.

Q2:Where is your factory located? How can I visit there? 
A:Our company is located in HangZhou City, China.All clients, from home and abroad,are warmly welcomed to visit us.

Q3. What is your terms of packing?

A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.

Q4. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We’ll show you the photos of the products and packages before you pay the balance.

Q5. What is your terms of delivery?
A: Normally our quotation is under FOB HangZhou, but we also accept EXW, FOB, CFR, CIF, DDU. 

Q6. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components. 

Q7.Can we customize our product?
A:Yes,you can.Customized material and standard are acceptable. We can provide different standards according to your market and favor.

Q8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them, 
no matter where they come from.

 

Q9: Why choose WeiLongDa?

A1. Wallboard – All WLD spray booth wall panels are anti-fire EPS,foam density is 14kg/m²;

A2. Front door – with aluminum view window, made of 50mm EPS, 0.8mm galvanized steel with plastic spray. Front door is like a face, beautiful, strong, practical, leakproof, anti-rusting & long-lasting, it means your workshop will attract more business and you will spend less time and money on spray booth maintenance;

A3. Steel structure – 4000kg vehicle can safely get in and out of the booth without worried, no noise, vibration is minimized, no air leakage, dust free, clean and efficient, we use thick galvanized steel pipes to make our spray booth cabinet, so our cabinet is anti-rusting;

A4. Heat exchanger – 2 layers radia pipes structure with 2 CZPT welded by experienced skillful welder, it is high efficiency & safe;

A5. Motor fan – introduced from Simens technology with large air flow at low noise, high quality bearing, full cooper coils, rock wool sound proff cover;

A6. Components finishing – since CZPT factory has its own powder coating facility, all components seen were with powder coated treatment. Strong anti-rusting finishing, not just good looking but also make a durable spray booth.

A7. Advantages of CZPT control panel – 1) dust free 2) user can intuitively see the booth actual operation status from the panel 3) spray temperature and baking temperature were set in internal memory, no need to reset temperature when change the mode 4) digital pressure display with over pressure alarm 5) over heat fire alarm system 6) we offer 1 year warranty, life-long maintenance for our booth;

A8. Small details – 1) hinge type ceiling filter frame, 1 person can handle changing filter 2) flter is self sealing no need screw to fix 3) fan filter is easy to access with small door and handle 4) front door locking pin with position locking 5) infrared lamp with rock wool isolation 6) infrared lamp install with isolation distance 7) infrared lamp with door open security sensor switch 8) infrared lamp with wire entrance prastic screw.

After-sales Service: Online & Others
Warranty: 12 Months
Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Vertical
Customization:
Available

|

air-compressor

Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.
air-compressor

Single-stage

The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.
air-compressor

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Custom Screw Air Compressor for Paint Booth Air Dryer, Air Tank and Filter Screw Air Compressor Painting Cabin Painting Booth Spray Booth   air compressor priceChina Custom Screw Air Compressor for Paint Booth Air Dryer, Air Tank and Filter Screw Air Compressor Painting Cabin Painting Booth Spray Booth   air compressor price
editor by CX 2023-06-08