China Shanghai Marya Pharmaceutical Oil-Free Screw Air Compressor for Industry and Hospital air compressor for sale

Solution Description

ZheJiang CZPT Pharmaceutical Rotary One Screw Oil-cost-free air compressors for thoroughly clean air

Merchandise Description

one. Overview

Oil-free of charge screw air compressors are widely utilised in industries that demand higher-good quality air sources these kinds of as medication, foodstuff, electronics, chemical substances, packaging, and so on. one hundred% pure compressed air is a required measure to make certain approach and merchandise quality, and substantial-conclude items that can be produced risk-free of charge and securely

The lubrication method in oil-free screw air compressors is a divided oil source circulation unit, the compression chamber and the bearing are tightly divided by a substantial-efficiency mechanical seal assembly. The lubricating oil can only movement in the enclosed spot and can’t enter the compression chamber. The compressed room is pure air that is not contained. Following a minor therapy of water and dust elimination, 100% pure compressed air can be acquired

The oil-free screw air compressor compresses the air by means of a two-stage screw rotor, and eliminates the water in the compressed air through a drinking water-gas separator. At the identical time, since there is no distribute oil cooling, a pre-cooler, intercooler, and soon after-cooler are normally configured to cool the compressed air to attain the needed exhaust temperature. A shaft seal with excellent performance is utilized on the shaft of the rotor to prevent lubricating oil from leaking into the compressed air to obtain accurate oil-cost-free.

two. Attribute
(1) Technical specification:

  • The air compressor can be driven by set frequency or variable frequency, with exact control, conserving at minimum 30% of strength consumption
  • The air compressor can comprehend remote actual-time checking and clever servicing
  • The air compressor can undertake a contact screen intelligent controller with powerful control and communication features

(2) Characteristic:

  • The screw primary motor utilizes three-wire meshing, non-equivalent width tooth technological innovation, meshing pair water film get in touch with, no use, very good drive equilibrium
  • The screw primary engine, pipes, and components are all made of corrosion-resistant unique stainless metal materials
  • Employing bearings, impartial internal air-sealing technology, to make certain that the lubricating drinking water will never get in touch with the bearing, and to preserve the services life of the bearing


  • The typical method stream of the air compressor technique: air compressor → gas storage tank → precision filter → refrigerated dryer → adsorption dryer → precision filter → precision filter → activated carbon filter → gasoline storage tank
  • Unique drinking water filtration and lubrication method to make sure good lubrication, sealing, noise reduction and cooling functions
  • 100% pure and oil-free, 100% oil-cost-free compression technique, lower sound, tremendous energy saving
  • Perfect isothermal compression: Given that the cooling performance of h2o is considerably greater than air compressor oil’ s cooling functionality, the working temperature of the oil-free of charge screw air compressor is only 40°C, which is shut to the suction temperature, reaching high-performance best isothermal compression
  • Reputable and consumer-pleasant design and style, reasonable format, basic and quickly service channel, simple servicing or fault mend
  • The back again finish of the air compressor can be equipped with supporting products and programs this kind of as refrigerated CZPT dryer, adsorption dryers, precision filters, gasoline storage tanks, and so forth.
  • The air compressor can decide on the fuel output of 1-60m³/min, the force is 7bar  

About Us



Project situation

Our Buyer

Exhibition & Our Crew

Packaging & Shipping and delivery


Shipping Cost:

Estimated freight per unit.

To be negotiated|

Freight Cost Calculator


After-sales Service: Video Online, Field Installation
Warranty: 1 Year
Lubrication Style: Oil-free


Shipping Cost:

Estimated freight per unit.

To be negotiated|

Freight Cost Calculator


After-sales Service: Video Online, Field Installation
Warranty: 1 Year
Lubrication Style: Oil-free



Choose an Air Compressor for Your Business

There are several factors to consider when choosing an air compressor for your business. One factor to consider is the type of compressor you are looking for, which may include single-stage, low noise, and positive displacement. Hope this article helps you make the right decision. After all, your business success will depend on this device! Let’s take a closer look at these factors. Also, consider what compressor manufacturers say about their products.

Positive displacement

Positive displacement air compressors compress air by drawing in a volume from an inlet and extruding it out of a chamber. This increases the pressure at which the gas can be pumped at rates that cannot be pumped through the outlet at lower pressures at higher mass flow rates. These types of compressors are available in single-acting and double-acting configurations. They are classified by the number of cylinders.
There are two different types of air compressors: reciprocating air compressors and screw compressors. Both are roll machines. Positive displacement air compressors use pistons and cylinders to compress air. The resulting air pressure builds up within the compressor housing, increasing the potential energy of the compressed air. Screw air compressors are the most popular positive displacement air compressors, which can be either single-stage screw-blade air compressors or multi-stage screw-blade oil-immersed screw air compressors.
Positive displacement flowmeters use a rotating measuring chamber to divide the fluid into discrete quantities. The number of times the chamber was refilled and emptied was used to estimate the total flow. However, positive displacement flow meters are prone to leaks, reducing the accuracy of the estimates. If a leak occurs, it can cause false readings and damage the compressor. However, leaks in positive displacement air compressors can reduce pressure.
The most common types of positive displacement air compressors are screw, reciprocating, and vane. Rotary positive displacement air compressors are also available as well as many other air compressors. Positive displacement air compressors are most commonly used in large manufacturing facilities. If you are considering an air compressor for commercial or industrial applications, it is imperative to understand how the components of the unit work. Please read the information below to learn more before deciding which application is best for you.
Positive displacement air compressors use a piston to force air into a chamber, compressing the air in the process. The piston moves in the opposite direction, thereby reducing the volume of the chamber. When the amount of air in the chamber reaches its maximum value, the valve opens, allowing it to escape at higher pressure. Positive displacement air compressors are generally less efficient than centrifugal compressors. However, they are still an excellent choice for a variety of applications.


The discharge pressure of the single-stage air compressor is used to control the operation of the compressor. Properly designed load/unload controls allow the air compressor to operate at its most efficient point while minimizing stress on the main engine bearings. Single-stage air compressors can approach variable speed efficiency with appropriate storage capacity. However, improper storage can cause premature bearing wear on the main unit. If this is the case, a single-stage air compressor may not be ideal.
A single-stage air compressor has only one cylinder, which means one stroke is required to move air from one cylinder to another. Pressure is measured in cubic feet per minute or CFM. Tank size is also important as a large single-stage air compressor may be required to operate multiple air tools. Single-stage air compressors can be used in a variety of applications and can last for years.
For the most common uses, single-stage air compressors are the most practical option. These devices work with most hand tools, from hammers to grinders. Single-stage air compressors are lightweight and easy to move. However, two-stage air compressors provide more CFM, making them a better choice for industrial or commercial use. However, two-stage compressors are not suitable for private use. Therefore, if your main purpose is DIY and craft projects, it is better to choose a single-stage air compressor.
Compared with two-stage air compressors, single-stage screw air compressors are cheaper. They come from a variety of manufacturers and range in power from 3 to 600 horsepower. Single-stage air compressors are a cost-effective solution for a variety of air compressor needs. They offer flexibility and multiple control methods, making them an excellent choice for many different applications. Therefore, when choosing an air compressor for your business, choose the one with the most suitable functions.
Single-stage air compressors are the most affordable and easy-to-use air compressors for small to medium jobs. They also have higher compression ratios. The compression ratio is the ratio of absolute discharge pressure to absolute inlet pressure. When calculating the ratio, it takes into account atmospheric pressure and gauge pressure. The compression ratio pushes the surface area of ​​the rotor, which increases the thrust load.
Single-stage air compressors are smaller and easier to transport than two-stage units. Single-stage air compressors have one air intake, and two-stage air compressors have two air intakes. The difference between single-stage and two-stage air compressors largely depends on the number of times the air is compressed. A single-stage air compressor compresses the air once, while a dual-stage air compressor compresses the same amount of air twice.

low noise

Low noise air compressors are ideal for a variety of applications. While no air compressor is completely silent, some models are much quieter than others. For the Hitachi EC28M portable compressor, the noise level is 59 decibels. The compressor features steel rollers that protect the internal components and give it a sleek, modern look. It also has a one-gallon fuel tank and a half-horsepower drive.
Noise from air compressors can be distracting and reduce productivity. It is important to choose low-noise air compressors to keep employees healthy and happy at work. While noise is an unfortunate aspect of working on the shop floor, reducing it can improve productivity. By reducing distracting noise, employees can focus on their work and communicate more effectively. That means higher quality work and happier clients. If you’re looking for a low-noise air compressor, be sure to read the tips below.
Low noise air compressors are an excellent choice for businesses of all sizes. These powerful tools can run multiple tools simultaneously. The two water tanks are made of rust-resistant aluminum and are stackable. This air compressor is heavier and can handle large jobs with ease. It costs more than other air compressors, but it can handle a lot of work efficiently. CZPT Air Tools air compressors come with a one-year warranty and are highly recommended by contractors.
Noiseless air compressors are generally more expensive than comparable products, but they are worth the extra cost. Noiseless compressors are a good option for businesses that need to avoid disturbing nearby people. For example, you might want to consider a low-noise air compressor for a dental office, which cannot tolerate noise. Fortunately, this problem can be solved by relocating the compressor to a location that is more isolated from your workspace.
One brand of low-noise air compressors offers two models. The CZPT Air Tools 2010A features a large cast aluminum can, regulating pressure gauge, and two universal quick-connects. It produces 68 decibels of noise when it works. It has a large 8-gallon fuel tank capacity and has wheels and handles for easy transport. Its powerful engine produces a low noise level of 68 decibels.
Another popular low noise air compressor is the Makita MAC210Q Quiet Series. This model is capable of producing up to 71.5 decibels of sound, which is the amount of air it produces at 90PSI. The MAC210Q features a durable oil-free pump and weighs just 36 pounds with a handle and wheels. These compressors are easy to move and ideal for indoor work.
China Shanghai Marya Pharmaceutical Oil-Free Screw Air Compressor for Industry and Hospital     air compressor for saleChina Shanghai Marya Pharmaceutical Oil-Free Screw Air Compressor for Industry and Hospital     air compressor for sale
editor by czh 2023-01-30